Good Luck

Home » ERW Galvanized Pipes

ERW Galvanized Pipes

The Galvanized Pipes are manufactured using steel and then coated using the process of galvanizing. These pipes are thoroughly tested and examined in accordance with international standards. The galvanized pipes are mostly demanded for plumbing or tubing purpose, which can withstand corrosion from water and other elements. The pipes are available in several standard as well as customized sizes, widths and thickness as per the specification provided by our clients. The pipes, we manufacture are as per the Indian standards and licensed through the government. Chiefly, the galvanized pipes are installed for water supply and tubing for outdoor applications, but also suitable for gas and sewage applications.

MOQ -10 tons
We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Welded Tubes & Pipes

We manufacture an extensive range of Welded Tubes & Pipes that are available in different structural shapes such as round, square and rectangular hollow sections, which can be easily welded into tube, tubing and structures. These tubes are used for structural purpose and mechanical & general engineering purpose. Further, these tubes can be used for drinking water supply. The use of chlorination and sodium silicate inhibit corrosion in mild steel tubes.


MOQ -10 tons
We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Hot Dip Galvanised Pipes

The Hot Dip Galvanized Pipes are made using quality steel metal with a galvanized coating. These pipes are coated with additional layer of zinc by plunging the metal in a bath of molten zinc at quite a high temperature. The hot dip galvanized pipes are preferred over others as these have superior corrosion resistance. Further, hot dip galvanized pipe can be easily welded and are suited for high temperature applications. It is used in oil & petroleum industry, gas industry and hydro industry. We make sure our pipes have tough and uniform barrier coating, which helps in long term protection and makes them suitable for both indoor and outdoor environments.

Features:

  • Hold superior corrosion resistance strength
  • Can be installed in indoor as well as outdoor areas
  • Longer working life
  • Economical in operation
  • Uniform design
  • Available in various length, thickness and size

Technical Specifications:

ProductThickness (mm) LengthStandards
Galvanised Pipesupto 9mm Random Length of 4 to 7 meters unless specified otherwiseIS : 1239 [PART1] / 1990

MOQ -10 tons
We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Black Pipes

The Black Pipes are made from steel as well as iron and are widely suited for water supply and flammable gases. Our pipes are developed under the stringent supervision of experienced engineer’s team, who tests these on several quality parameters. The black pipes are available in various lengths and thickness as per the suitability of our clients. These pipes are also used in many places to transmit natural gas or propane fuel, heating or cooling water to heat exchangers, air handlers, variable air volume devices or HVAC equipment.

Features:

  • Heat resistant
  • Corrosion resistant
  • Mostly preferred in supply of gas and oil
  • Easy to install
  • Meets all the Indian standards


Available Shapes : Round, Rectangular & Square

Technical Specifications:

ProductThickness (mm) LengthStandardsStandards
Black Pipes1-9mm 4-7meterBS : 1387/ASTM A-1201/2' - 14' OD

MOQ -10 tons
We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Grooved Pipes

ERW Black & Galvanized Pipes as per ASTM A 53 Grade A & B, Sech 40, 30, 80 from 1/2" - 12" size.
Plain End, Grooved or SS as per requirements

Product Details:

  • Usage/Application : Fire Fighting,Chilling Water,Line Pipe
  • Diameter : 1/2" - 12"

MOQ - 25 Metric Ton
We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Electrical Conduits

UL 6 - Galvanized Rigid Metal Conduits

Goodluck RIGID CONDUITS are hot dipped galvanized both inside and outside. The rigid conduits are threaded both ends with state-of-the-art Automatic threading machines and supplied with UL approved couplings on one end and other end protected with color coded plastic thread protection caps. The external and internal surface of the conduits is hot dipped galvanized and then a clear anticorrosion coating is done for higher protection against corrosion giving the rigid conduits long life. Rigid conduits are for the job that requires physical protection that only thickest walls can provide and rigid conduits are known for their thick walls and heaviest weights. Goodluck RMC is tough enough for use in outdoor applications, energy and manufacturing plants and corrosive environments.

Goodluck rigid conduits have prestigious UL6 certification. (File No. E510369). We also make rigid conduits as per American national Standard for electrical rigid conduit (ANSI C80.1)

Technical Specifications:

Trade Size Metric Designator Outside Diameter* Nominal Wall Thickness** Min. Acceptable
Weight of Ten
Pcs of Conduits With Couplings
Qty In Master Bundle Qty In Inner Bundle End Caps Color
in mm in mm kg pcs pcs
1/2" 16 0.840 21.34 0.104 2.64 35.8 250 10 Black
3/4" 21 1.050 26.67 0.107 2.72 47.6 200 5 Red
1" 27 1.315 33.40 0.126 3.20 69.4 125 5 Blue
11/4" 35 1.660 42.16 0.133 3.38 91.2 90 Red
11/2" 41 1.900 48.26 0.138 3.51 112.9 80 Black
2" 53 2.375 60.33 0.146 3.71 150.6 60 Blue
2.5" 63 2.875 73.03 0.193 4.90 239.0 37 Black
3" 78 3.500 88.90 0.205 5.21 309.6 30 Blue
31/2" 91 4.000 101.60 0.215 5.46 376.9 25 Black
4" 103 4.500 114.30 0.225 5.72 441.0 20 Blue
5" 129 5.563 141.30 0.245 6.22 535.8 15 Blue
6" 155 6.625 168.28 0.266 6.76 791.7 10 Blue

Applicable Tolerances:

  • Length: 10 Feet (3.05 Meters) +/- 0.25 inch (6.35 mm)
  • Outside Diameter: TRADE SIZE 1/2" TO 1-1/2": ±0.015" (±0.38MM); TRADE SIZE 2" - 6" : ±1%
  • **Wall thickness mentioned are just for information only and not a requirement of UL standard.

We also produce rigid conduits in 20 feet (6 Meters) length. 20 Feet conduit provide quick and easy installation and also fewer fittings.

Features of Goodluck Rigid Conduits:

  • Higher corrosion resistance with superior & uniform galvanizing quality.
  • Accurate dimensions and uniform wall thickness.
  • Clean and smooth internal surface.
  • Easy coupling and fast installation.
  • Easy wire pushing and pulling.
  • Easy & good fabrication properties like smooth cutting, bending & welding.
  • Uniform and consistent quality.
  • Meets the underwriters laboratories specifications Ul6.
  • Tested and certified for safety.


UL 797 - Electrical Metallic Tubing (EMT)

Goodluck EMT is a steel raceway of circular hollow sections which is non-threaded i.e. plain ends and is produced by high quality mild steel hot rolled coils. The exterior and interior of the EMT is protected by superior quality zinc coating done by in-line hot dipped galvanizing process. Additionally the exterior surface of EMT is coated by clear anti-corrosion coating or a zinc chromate coating for higher protection against corrosion giving the EMT long life and good smooth finish. The internal surface of the EMT is further coated with an organic zinc lubricants or higher grade organic epoxy resin by a state of art patented on – line automatic machine. This coating gives EMT a smooth internal surface which makes wire pushing and pulling easy and also protects against the corrosion.

The EMT is supplied in plain ends with bundling done as per the standards/market practice or as per specific requirements of customer. Goodluck EMT can be installed either inside or outside and in all conditions and are produced from trade size 1/2" to 4" and in standard lengths of 10 feet each. However, we also produce and supply EMT in 20 feet (6.10 Meters) length. 20 Feet EMT provide quick and easy installation and also fewer fittings.

Each length of Goodluck EMT has label affixed containing UL listing information, sizes and a bar code.

Goodluck EMT has prestigious UL 797 certification. (File No. UL-US-2003321-0 & UL-CA-2002260-0). We also produce EMT as per American national Standard for electrical rigid conduit (ANSI C80.3)

Technical Specifications:

Trade Size Metric Designator Outside Diameter* Nominal Wall Thickness** Approx Weight / 100ft (30.5m) Inner Bundle Qty Master Budle Qty
in mm in mm lb kg pcs pcs
1/2" 16 0.706 17.93 0.042 1.07 30 13.6 10.0 700
3/4" 21 0.922 23.42 0.049 1.24 46 20.9 10.0 500
1" 27 1.163 29.54 0.057 1.45 67 30.4 10.0 300
11/4" 35 1.51 38.35 0.065 1.65 101 45.8 5.0 200
11/2" 41 1.74 44.2 0.065 1.65 116 52.6 5.0 150
2" 53 2.197 55.8 0.065 1.65 148 67.1 120
21/2" 63 2.875 73.03 0.072 1.83 216 98 61
3" 78 3.5 88.9 0.072 1.83 263 119.3 51
31/2" 91 4 101.6 0.083 2.11 349 158.3 37
4" 103 4.5 114.3 0.083 2.11 393 178.3 30

Applicable Tolerances:

  • Length: 10 Feet (3.05 Meters) +/- 0.25 inch (6.35 mm)
  • Outside Diameter:
    TRADE SIZE 1/2" TO 2" (16 to 53) : ± 0.005" (±0.13 mm)
    TRADE SIZE 2 1/2" (63) : ± 0.010" (0.25 mm)
    TRADE SIZE 3" (78) : ± 0.050" (0.38 mm)
    TRADE SIZE 3 1/2" TO 4" (91 to 103 ) : ± 0.020" (±0.51 mm)

Features of Goodluck EMT:

  • Higher Corrosion resistance with superior and uniform galvanizing quality.
  • Accurate dimensions and uniform wall thickness.
  • High quality internal coating with high grade organic epoxy resins/zinc
  • Clean, smooth and defect-free interior surface.
  • Easy and fast installation.
  • Easy wire pushing and pulling.
  • Easy & good fabrication properties like smooth cutting, bending & welding.
  • Uniform and consistent quality.
  • Meets the Underwriters Laboratories specifications UL797.
  • Tested and certified for Safety.


UL 1242 - Electrical Intermediate Metal Conduit

Goodluck IMC CONDUITS are produced of high quality steel using an electric resistance welding process and hot dipped galvanized both inside and outside.

Goodluck Intermediate metal cond uit (IMC) are approximately one third lighter than rigid metal conduit (RMC) so it keeps our customer's costs down and increase productivity. IMC can be interchangeably used for rigid conduits and have same threads and use same couplings and fittings.

Goodluck IMC conduits have prestigious UL 1242 certifications for IMC.

Technical Specifications:

Trade Size Metric Designator Outside Diameter* Nominal Wall Thickness** Approx Weight / 100ft (30.5m) Inner Bundle Master Budle Thread Protector Color
in mm lb mm kg pcs pcs
1/2" 16 0.815 20.7 1.97 62 28.1 10 350 Yellow
3/4" 21 1.029 26.13 2.10 84 38.1 5 250 Green
1" 27 1.29 32.76 2.35 119 54.00 5 170 Orange
11/4" 35 1.638 41.6 2.41 158 71.7 135 Green
11/2" 41 1.883 47.82 2.54 194 88 110 Yellow
2" 53 2.36 59.94 2.67 256 116.1 80 Orange
21/2" 63 2.857 72.56 3.81 441 200 37 Yellow
3" 78 3.476 88.29 3.81 543 246.3 30 Orange
31/2" 91 3.971 100.86 3.81 629 285.3 24 Yellow
4" 103 4.466 113.43 3.81 700 317.5 24 Orange

Applicable Tolerances:

  • *OUTSIDE DIAMETER TOLERANCES:
    TRADE SIZES 1/2" TO 1" : +/- .005" (0.13MM)
    TRADE SIZES 1-1/4" TO 2" : +/- .0075" (0.19MM)
    TRADE SIZES 2-1/2" TO 4" : +/- 0.10" (0.25MM)
  • **WALL THICKNESS TOLERANCES:
    TRADE SIZES 1/2" TO 1" : +/- 0.19 MM
    TRADE SIZES 1 1/4" TO 4" : +/- 0.25 MM
  • LENGTH TOLERANCE = 10 FT. (3.05M)
  • WITH A TOLERANCE OF +/- .25 IN. (6.35MM)

Features of Goodluck IMC Conduits:

  • Cost effective as weighs less than Rigid
  • Quick and easy installations.
  • Meets the Underwriters Laboratories specifications Ul1242
  • Tested and certified for Safety.

We can also produce IMC conduits in 20 feet (6 Meters) length. 20 Feet conduit provided quick and easy installation and also fewer fittings.


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Member IndiaMART.com© Goodluck India Limited . All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?