Good Luck

Home » CR Coils & Sheets

CR Coils & Sheets

We are offering excellent CR (Cold Rolled) Coils that are made from finest steel metal and produced from hot rolled, before being pickled. The coils are obtained through cold rolling where the metal is melted below its re-crystallization temperature, which enhances their strength. It is then shrinked by a single stand cold roll steel mill directly or by reversing mill that consist of several single stands in a series. The coil is passed through pairs of rolls in order to reduce thickness and achieve uniformity.

Our coils are demanded all over the country, chiefly in automobile components, consumer durables items, industrial goods and precision tubes. Moreover, we find its applications in chassis for vehicles, earth moving equipment, galvanized sheets, construction of railways coaches, drums & barrels, material handling equipment, tin plates, agricultural equipment, and many others. The cold rolled coils offered by us are made as per the IS 513, JIS 3132, EN 10051 and DIN 1614 quality standards.


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Cold Rolled Coils & Sheets

We are providing premium quality Cold Rolled Coils & Sheets, which are available in wide range of lengths, thickness, widths and other dimensions to meet the clients\92 requirements. These coils & sheets are tested under various parameters and international standards before being made available to the clients. The cold rolled coils & sheets are widely demanded in power plants, wind mills, chemical industry, cement industry and many more. The metal is first melted to a temperature below the re crystallization and then goes through the process where these are passed through roll in order to obtain the desired thickness. We make these available as per the requirement of our customers.

Features:

  • Made from high grade steel
  • Uniformity in sheets thickness
  • Corrosion resistant
  • High impact strength

Technical Specifications:

Cold Rolled Coils

Product Thickness (mm) Width (mm) Coating (gms/m) Finishing Coils / Pkt. Weight (mt) Packing Standards
Cold Rolled Coils 0.14 to 1.25 600-1000 100-300 Chromated & Dry 3mt-10mt Mills standard export sea worthy JIS G : 3302 IS277

Cold Rolled Sheets

Product Thickness (mm) Width (mm) Coating (gms/m) Finishing Coils / Pkt. Weight (mt) Packing Standards
Cold Rolled Sheets 0.14 to 1.25 600-1000 N.A. As Rolled 3mt-10mt Mills standard export sea worthy JIS G : 3141


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Galvanised Coils

Our company is manufacturing supreme quality Galvanized Coils that are made from high grade steel metal and coated with zinc on both sides. We achieve these galvanized coils either by two hot dipping or electro galvanizing process. In this, the steel is passed through a bath of molten zinc. Thus, the layer of zinc tightly adheres to the base metal through an iron-zinc bonding layer. The galvanized coils are widely demanded in wind mills, chemical industry, cement industry, power plants, railway industry, refrigerators and many more.

Features:

  • Longer life
  • Cleared through all certifications & quality standards
  • Highly robust
  • Corrosion resistant
  • Cost effective

Technical Specifications:

Product Thickness (mm) Width (mm) Coating (gms/m) Finishing Coils / Pkt. Weight (mt) Packing Standards
Galvanised Coils 0.14 to 1.25 600-1000 N.A. As Rolled 3mt-10mt Mills standard export sea worthy JIS G : 3141


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Galvanised Sheets

Our company is manufacturing the finest range of Galvanized Sheets, which are widely used in several applications such as, agriculture, automobile, construction, electrical appliances and many more. The galvanized sheets are obtained from passing the metal through molten zinc, which gives rigidity and strength against corrosion. The entire process is closely monitored by engineers and tested on several international parameters. Here, the zinc not only serves as a barrier between the steel and the environment, it will wear out itself in order to protect the underlying steel sheet.

Features:

  • Cost effective
  • Longer life
  • Cleared through all certifications & quality standards
  • Made from high grade steel
  • Highly robust
  • Easy to install
  • Corrosion resistant
  • Uniformity in sheets thickness
  • High impact strength

Technical Specifications:

Galvanized Sheets

Product Thickness (mm) Width (mm) Coating (gms/m) Finishing Coils / Pkt. Weight (mt) Packing Standards
Galvanized Sheets 0.14 to 1.25 600-1000 N.A. As Rolled 3mt-10mt Mills standard export sea worthy JIS G : 3141

Galvanized Corrugated Sheets

Product Thickness (mm) Width (mm) Coating (gms/m) Finishing Coils / Pkt. Weight (mt) Packing Standards
Galvanized Corrugated Sheets 0.014 to 0.80 762-1000 100-300 Chromated & Dry 3mt-10mt Mills standard export sea worthy JIS G : 3302 IS277


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

CRCA

We offer high quality CRCA (cold rolled close annealed), which are widely used for their robustness and durability in automobile industry, electronic appliances, agricultural equipments and many more. In this, after hot rolling and pickling is done, the steel is cold rolled in order to reduce its thickness. Afterwards, the process goes through annealing in closed atmosphere of nitrogen or other non-oxidizing gases, which softens it back up while protecting it from oxidation.

Features:

  • Smooth and accurate surface
  • Uniformity thickness
  • Highly durable
  • Easy to install
  • Superior impact strength
  • Better corrosion resistance ability

Technical Specifications:

Product Thickness (mm) Width (mm) Coating (gms/m) Edge Finish Coils / Pkt. Weight (mt) Packing Standards
Closely Annealed Steel Coil 0.20 to 1.500mm 550 to 1000 CN.A. Mill Edge / Trimmed Edge 3.00mt-10.00mt Mills standard export sea worthy JIS G : 3141/3132 EN 10051, DIN 1623 / 1614


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

HRPO

At good Luck we provide Pickling & oiling of HR coils in order to remove the rusty layers & scales from the surface and gives a bright surface finish. The application of oil & superior packaging ensures that the coils/sheets remain rust-free.

Features:

  • Complete removal of iron oxide layers
  • Scale-free & Rust-free Surface
  • Bright & clean surface finish
  • Ready-to-use

Technical Specifications:

Thickness (mm) Width (mm) Length (For Sheets) Edge Thickness Tolerance Width Tolerance Coil Weight Coil ID Coil OD Length Tolerance (For Sheets) Camber Tolerance
1.5 mm
6 mm
50 mm
1500 mm
500 mm to 4000 mm Mill Edge/ Slit Edge +/- 0.05 mm As per Specification Depends on Size Specification 600 mm up to 1500 mm 0 mm/+3 mm 1.50 mm Max. per 1000 mm


We welcome your enquiry & try to respond in shortest possible time Yes! I am Interested

Member IndiaMART.com© Goodluck India Limited . All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?